EPA Area Source Rules
From 2008 through 2010, the U. S. Environmental Protection Agency (EPA) passed a number of area source regulations for the control of Hazardous Air Pollutants (HAPs*).
These new area source rules that may impact businesses in Benton County. Below you will find information on the different rules, links to the rules on EPA’s website as well as notification forms.
The most recent final area source regulations that affect known facilities in Benton County are:
NEW! Area Sources Boilers
- Subpart JJJJJJ - National Emission Standards for Area Sources: Industrial/Commercial/Institutional Boilers
- Fact Sheet
- Initial Notification of Compliance Form (Word) - (Due September 17, 2011 for new sources and July 19, 2012 for existing sources)
- Initial Notification of Applicability (Word) - (Due September 17, 2011)
- Tune Up & Record Keeping Guidance
Compliance Timeline for Existing Sources:
- March 21, 2012 - Sources subject to a tune-up work practice or management practice standard must demonstrate compliance.
- March 21, 2014 - Sources subject to an emission limit must demonstrate compliance.
- March 21, 2014 - Sources subject to the energy assessment requirement must complete the energy assessment.
Compliance Timeline for New Sources:
- May 20, 2011 - Must demonstrate compliance with all requirements of the rule upon startup of the affected source.
Area Source Boiler PowerPoint, courtesy of EPA Region 10
Gasoline Distribution Bulk Terminals, Bulk Plants, and Pipeline Facilities.
- Subpart BBBBBB -National Emission Standards for HAPs
- Brochure Explaining Rule
Gasoline Dispensing Facilities
- Subpart CCCCCC - National Emission Standards for HAPs
- Initial Notification Form (Word) (Due Jan. 10, 2011 for existing sources, upon start-up for new sources.)
- Brochure Explaining Rule
- Fact Sheet
Paint Stripping and Miscellaneous Surface Coating Operations at Area Sources.
- Please note that this rule inlcudes most AutoBody Shops.
- Subpart HHHHHH Emission Standards for HAPs (Initial Notification due Jan. 2010 for exisiting sources, upon start-up for new sources.)
- EPA has quite a bit of information on the new Autobody Rules, in their Collision Repair Campaign: Click here for more information.
Hospital Ethylene Oxide Sterilizers
- Subpart WWWWW Emission Standards for HAPs
- Initial Notification Form (Word) (Due Dec. 29, 2008 for existing sources, upon start-up for new sources.)
- Brochure Explaining Rule
Nine Metal Fabrication and Finishing Source Categories
- Brochure Explaining Rule
- Questions and Answers
- (Initial Notification due July 25, 2011, Notification of Compliance due Nov. 22, 2011.).
Useful Links:
- EPA’s Page on Area Source Standards/Technology Transfer/Air Toxics Website
- Area source rules that have been released as final.
- A list of area source rules, compliance materials and notification examples.
- “EPA’s “About Air Toxics” page.